PEDOT pillar fabrication using DOD inkjet system

Wei Cui; Cheng-Ling Chang; Wei-Chih Wang

doi:10.1117/12.915229

Translator Disclaimer

20 April 2012 PEDOT pillar fabrication using DOD inkjet system

Wei Cui, Cheng-Ling Chang, Wei-Chih Wang

Author Affiliations +

Proceedings Volume 8348, Health Monitoring of Structural and Biological Systems 2012; 834819 (2012) https://doi.org/10.1117/12.915229
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2012, San Diego, California, United States

Abstract

In this paper, we present our preliminary results of high aspect ratio 3D PEDOT pillar study by drop-on demand (DOD) direct printing system. Design of the experimental setup and the fabrication of the DOD PEDOT pillar are introduced. Currently, the system can achieve a PEDOT pillar with a height of 300 μm and 80 μm in diameter. The proposed PEDOT 3D printing process has a wide range of potential applications in the eletronics and display industry.

Citation Download Citation

Wei Cui, Cheng-Ling Chang, and Wei-Chih Wang "PEDOT pillar fabrication using DOD inkjet system", Proc. SPIE 8348, Health Monitoring of Structural and Biological Systems 2012, 834819 (20 April 2012); https://doi.org/10.1117/12.915229

ACCESS THE FULL ARTICLE