Translator Disclaimer
24 October 2012 Selecting the appropriate splitter for a reflective optical fiber dosimeter probe
Author Affiliations +
Proceedings Volume 8412, Photonics North 2012; 84120D (2012)
Event: Photonics North 2012, 2012, Montréal, Canada
Based on an innovative in-vivo optical dosimeter platform developed by scientists at University Health Network, we miniaturized the optical dosimeter in a tiny probe that fits the tip of an optical fiber. The approach consists in a measure of the absorbance change of a sensitive radiochromic material. The increase in absorbance is measured at a single wavelength and the linearly depends on the ionizing radiation dose. For compactness and design reasons, the proposed probe works in a reflective mode. A significant drawback when working with a reflective configuration is that reflections coming from splitter interfaces add to the signal and cause an apparent deviation from linearity. We studied the back reflections coming from a standard splitter and two custom made bifurcated optical fibers assemblies; 1) 7 fibers and 19 fibers. The 7 fibers connected to a 500 μm plastic optical fiber had the lowest reflection of 0.016% which was 3 times less than the 19 fibers and 100 times less than the standard splitter. An appropriate choice of the splitter was then imperative otherwise an under evaluation of the relative absorbance of −30% will happen.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Serge Caron, André Croteau, Alexandra Rink, David Jaffray, and Ozzy Mermut "Selecting the appropriate splitter for a reflective optical fiber dosimeter probe", Proc. SPIE 8412, Photonics North 2012, 84120D (24 October 2012);


The silver layers in fiber-optic sensors
Proceedings of SPIE (December 07 2017)
Optical Thin Film Monitoring Using Optical Fibers
Proceedings of SPIE (December 23 1986)
Optical fiber sensor toward pyridine vapors detection
Proceedings of SPIE (May 16 2008)
Microphone based on fiber optic reflective sensor
Proceedings of SPIE (September 25 1995)

Back to Top