Translator Disclaimer
Paper
15 October 2012 Research on method for improving measurement precision of CCD laser collimation system with adaptability to the environment
Author Affiliations +
Proceedings Volume 8417, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 841719 (2012) https://doi.org/10.1117/12.971199
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
Laser collimation System based on linear CCD is currently widely used in the area of high precision angle measurement. However, for some special application the collimation system would be used outside and in the complex environment. In these cases the precision of the current collimation system would be greatly reduced with the change of the light intensity of the environment. Therefore, it is necessary to research the method to improve measurement precision of laser collimation system under the complex environment. In this paper, based on the principle of CCD laser collimation the method for improving measurement precision of laser collimation system with adaptability to the environment is studied. The linear driving circuit of linear CCD TCD1208AP whose integration time can be automatically adjusted according to the change of the background intensity is designed based on CPLD. For the CCD output signal a new kind of mode of signal process is presented with which the threshold can be self-adaptable to the environment. The simulation has been carried out and the results have verified the effectiveness of the project.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaofeng Zhao, He Chen, Zhili Zhang, and Chuntong Liu "Research on method for improving measurement precision of CCD laser collimation system with adaptability to the environment", Proc. SPIE 8417, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 841719 (15 October 2012); https://doi.org/10.1117/12.971199
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Progressive scan CCD imaging system
Proceedings of SPIE (March 14 1995)
MDSP a modular DSP architecture for a real time...
Proceedings of SPIE (March 08 2002)
A new high speed image sensing technique based on an...
Proceedings of SPIE (January 29 2007)
Platinum silicide charge sweep sensor for time delay and...
Proceedings of SPIE (September 08 1995)
THX 31162 768 x 576 pixel area array CCD...
Proceedings of SPIE (July 01 1990)

Back to Top