You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
7 November 2012Hydrostatic pressure sensor using two-core photonic crystal fiber
A hydrostatic pressure sensor based on a custom made two-core photonic crystal fiber (TC-PCF) is experimentally
demonstrated. The TC-PCF was fabricated in our lab using standard PCF fabrication techniques. A hydrostatic pressure
sensor based on the in-line fiber Mach-Zehnder interference is reported. The two solid cores of the TC-PCF separated by
an air hole acted as the two arms in the interferometer. The pressure sensor has high repeatability and high sensitivity of
-54.06 pm/MPa.
The alert did not successfully save. Please try again later.
Zhengyong Liu, Ming-Leung Vincent Tse, Daru Chen, Chao Lu, Hwa-Yaw Tam, "Hydrostatic pressure sensor using two-core photonic crystal fiber," Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 842170 (7 November 2012); https://doi.org/10.1117/12.970388