Closed loop registration control (RegC) using PROVE as the data source for the RegC process

Erez Graitzer; Avi Cohen; Vladimir Dmitriev; Itamar Balla; Dan Avizemer; Dirk Beyer; Klaus Boehm; Wolfgang Degel

doi:10.1117/12.976632

29 June 2012 Closed loop registration control (RegC) using PROVE as the data source for the RegC process

Erez Graitzer, Avi Cohen, Vladimir Dmitriev, Itamar Balla, Dan Avizemer, Dirk Beyer, Klaus Boehm, Wolfgang Degel

Author Affiliations +

Proceedings Volume 8441, Photomask and Next-Generation Lithography Mask Technology XIX; 84410A (2012) https://doi.org/10.1117/12.976632
Event: Photomask and NGL Mask Technology XIX, 2012, Yokohama, Japan

Abstract

At sub 4X nm nodes in memory and sub 3X nodes in logic devices mask registration (Reg) is becoming a significant yield limiting factor. This is especially true for Double Patterning Technologies (DPT) where mask to mask overlay on the wafer is heavily influenced by mask registration error. Getting advanced mask registration into specification is a challenge for all mask shops as the tight registration specs are driven by tight wafer overlay specs. The first step in meeting the registration spec challenge in the mask shop is to be able to measure registration with the required specifications. With PROVE® Carl Zeiss SMS has recently introduced into the market a new registration and overlay metrology system which utilizes 193nm illumination for high resolution and a six axes controlled stage. The second step in meeting the registration spec challenge is to actively correct for intrinsic registration errors on the mask. For this Carl Zeiss SMS has developed the RegC® tool. The RegC® tool is based on writing strain zones with the help of an ultrashort pulse laser in the bulk of the mask. The strain zones induce deformations in the mask which practically push the misplaced features to a new location that after removing scale and orthogonality (S/O) correctable errors reflects a smaller residual registration error. By combining the RegC® tool with data generated by PROVE® it is possible to close the loop on the registration control process in the mask shop without wafer print or mask re-write. In this paper we report the demonstration results of a closed loop process between PROVE® and the RegC® tools.

Citation Download Citation

Erez Graitzer, Avi Cohen, Vladimir Dmitriev, Itamar Balla, Dan Avizemer, Dirk Beyer, Klaus Boehm, and Wolfgang Degel "Closed loop registration control (RegC) using PROVE as the data source for the RegC process", Proc. SPIE 8441, Photomask and Next-Generation Lithography Mask Technology XIX, 84410A (29 June 2012); https://doi.org/10.1117/12.976632

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE