Manufacturing and testing of a convex aspherical mirror for ASSIST

Rik ter Horst; Remko Stuik

doi:10.1117/12.926126

13 September 2012 Manufacturing and testing of a convex aspherical mirror for ASSIST

Rik ter Horst, Remko Stuik

Proceedings Volume 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II; 84504X (2012) https://doi.org/10.1117/12.926126
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

ASSIST is the testbed for the ESO Adaptive Optics Facility. The main objective of ASSIST is the characterization of the 1.2 meter deformable mirror which will replace the existing secondary of one of the 8 meter VLT telescopes. A large concave 1.65 meter diameter aspherical primary mirror combined with a 140 mm diameter convex aspherical secondary forms the main optical system of ASSIST. Two additional optical units provide the light sources and the wave front analyzing optics. Without having the possibility for checking the entire optical system as a whole, each individual mirror had to be manufactured and tested using reliable techniques. The secondary mirror for ASSIST (AM2) is made of an optically transparent material (BK7) with a specific and accurate backside radius in order to achieve a null test in transmission. Furthermore, not only the overall RMS surface error of AM2 is important, but due to the fact that it will be used in a setup that measures specific spatial frequencies, also the spatial frequencies of the surface error of AM2 is important. The aspherical surface is tested in double pass using an optical flat and an interferometer with a transmission sphere. Manufacturing of this asphere is mainly done by hand at the optical lab of NOVA-ASTRON. The final accuracy of the reflecting surface is within the required 50 nm RMS with a surface roughness of less than 2 nm RMS. This paper reports in more detail on manufacturing and testing of the a-spherical convex mirror.

Citation Download Citation

Rik ter Horst and Remko Stuik "Manufacturing and testing of a convex aspherical mirror for ASSIST", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84504X (13 September 2012); https://doi.org/10.1117/12.926126

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available