Characterization of HAWAII-2RG detector and SIDECAR ASIC for the Euclid mission at ESA

P-E. Crouzet; J. ter Haar; F. de Wit; T. Beaufort; B. Butler; H. Smit; C. van der Luijt; D. Martin

doi:10.1117/12.924968

25 September 2012 Characterization of HAWAII-2RG detector and SIDECAR ASIC for the Euclid mission at ESA

P-E. Crouzet, J. ter Haar, F. de Wit, T. Beaufort, B. Butler, H. Smit, C. van der Luijt, D. Martin

Author Affiliations +

Proceedings Volume 8453, High Energy, Optical, and Infrared Detectors for Astronomy V; 84531R (2012) https://doi.org/10.1117/12.924968
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

In the frame work of the European Space Agency's Cosmic Vision program, the Euclid mission has the objective to map the geometry of the Dark Universe. Galaxies and clusters of galaxies will be observed in the visible and near-infrared wavelengths by an imaging and spectroscopic channel. For the Near Infrared Spectrometer instrument (NISP), the state-of-the-art HAWAII-2RG detectors will be used, associated with the SIDECAR ASIC readout electronic which will perform the image frame acquisitions. To characterize and validate the performance of these detectors, a test bench has been designed, tested and validated. This publication will present preliminary measurements on dark current, read noise, conversion gain and power consumption, In summary, the following results have been obtained in our system: dark current of 0.014 e^-/s/pixel at 82K; readout noise of 23 e^- for a single CDS pair and 5.4e^- for a Fowler(32); a total electric power consumption of 203 mW in LVDS (excluding I/O power) mode. The SIDECAR ASIC has also been characterized separately at room temperature. Two references voltages, VPreAmpRef1 and VrefMain, used to adjust the offset of the pre-amp DAC has been studied. The reset voltage, V_reset, was measured to have a root mean square stability of 22μV over 15 minutes and a root mean square stability value of 24μV over a 15 hours measurement period. An offset between set value and measured value of around 60mV for low set voltages has been noticed. The behavior of VPreAmpRef1 and VrefMain with a adjustable external input voltage has been conducted in order to tune these two biases to cover the desired input range with the best linearity.

Citation Download Citation

P-E. Crouzet, J. ter Haar, F. de Wit, T. Beaufort, B. Butler, H. Smit, C. van der Luijt, and D. Martin "Characterization of HAWAII-2RG detector and SIDECAR ASIC for the Euclid mission at ESA", Proc. SPIE 8453, High Energy, Optical, and Infrared Detectors for Astronomy V, 84531R (25 September 2012); https://doi.org/10.1117/12.924968

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE