Translator Disclaimer
19 October 2012 LED illuminator for a microdisplay projector
Author Affiliations +
An illumination system for a microdisplay projector with a two-step imaging system is described here. In the first step, an imaging condenser creates an image of the LED at the color combiner entrance window. In the second step, we relay the image of the integrator exit window onto the micro-display. The illuminator demonstrates high collection efficiency, small footprint, and efficient mixing of light from RGB LEDs that provides required uniformity. A variety of approaches to collecting light emitted from LEDs of various types are compared, leading to the two-step design. A design example using a 0.55” diagonal DLP-based optical engine is presented with the following characteristics: Footprint: 3.9”x3.3”x2.0” (25.7 cubic inches) Light output: 338 white lumens Efficiency: 4.7 lm/watt
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simon Magarill "LED illuminator for a microdisplay projector", Proc. SPIE 8487, Novel Optical Systems Design and Optimization XV, 848707 (19 October 2012);


30-view projection 3D display
Proceedings of SPIE (March 11 2015)
Using the toroidal and cylindrical lenses to project the RGB...
Proceedings of SPIE (September 25 2013)
Catadioptric relay for dual DMD projectors
Proceedings of SPIE (September 21 1998)
An optical source for characterizing CMOS imagers
Proceedings of SPIE (September 29 2004)

Back to Top