Translator Disclaimer
15 October 2012 Stray light analysis of the Formosat-5 telescope
Author Affiliations +
Stray light analysis of FormoSat-5 telescope has been studied. The geometric contour profiles of the baffles are determined by checking the degree of blocked direct-incidence stray light. Trade-off between different baffle contours has been made by comparing the direct-incidence stray light, incident energy ratio, and incident energy uniformity of the focal plane assembly (FPA). Detail studies have then performed on the contribution of the stray light due to direct incidence, scattering from components, and multi-reflection between optical components. The effect of the FPA structure is also considered since it is the component adjacent the most to the FPA. In addition, the tolerance of the baffles fabrication and assembly are introduced.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ting-Ming Huang, Cheng-Fang Ho, Po-Han Huang, Yu-Chuan Lin, and Shenq-Tsong Chang "Stray light analysis of the Formosat-5 telescope", Proc. SPIE 8491, Optical System Alignment, Tolerancing, and Verification VI, 84910A (15 October 2012);


Stray light analysis of the Lyman FUSE fine error sensor
Proceedings of SPIE (November 11 1996)
Compact three-mirror anastigmat with reflective lens
Proceedings of SPIE (September 21 1998)
Stray light analysis of SALEX instrument
Proceedings of SPIE (September 02 2008)

Back to Top