Paper
15 October 2012 Development of an optical system for geometric inspection of external surface of pipelines
Maryah E. M. Haertel, Armando Albertazzi G. Jr., João R.C. Melo, Maurício Reck, Darlan Becker, João M. C. Santos, Claudio S. Camerini
Author Affiliations +
Abstract
This paper presents a new configuration of an optical measurement system using fringe projection for 3D shape measurement using active photogrammetry. The system was optimized to measure 3D geometries of external surfaces of pipes. The system was mainly designed for periodic inspections of pipelines submitted to environmental induced corrosion and local dents. It has a compact design and it is suitable to inspect pipes with diameters 250 mm (10”) and up. The software is able to compute geometric parameters of the inspected area like depth, volume and length of the damaged areas. The developed system uses a special compact fringe projector composed of an acrylic tube printed with two sinusoidal fringe patterns with two different frequencies, a set of LEDs forming a line light source and a special phase shifting approach with absolute phase calculation procedure. The three-dimensional surface of the pipe is measured and displayed using virtual reality techniques. The measured area is 300 mm x 200 mm. The paper also presents results of quantitative evaluations as well application results.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Maryah E. M. Haertel, Armando Albertazzi G. Jr., João R.C. Melo, Maurício Reck, Darlan Becker, João M. C. Santos, and Claudio S. Camerini "Development of an optical system for geometric inspection of external surface of pipelines", Proc. SPIE 8498, Optics and Photonics for Information Processing VI, 84980M (15 October 2012); https://doi.org/10.1117/12.930268
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Projection systems

Prototyping

3D metrology

Phase shifting

Photogrammetry

3D modeling

Back to Top