Improvement of lithographic performance and reduction of mask cost by simple OPC

Koichiro Tsujita; Koji Mikami; Hiroyuki Ishii; Tadashi Arai; Ryo Nakayama; Michael C. Smayling; Valery Axelrad; Hidetami Yaegashi; Kenichi Oyama

doi:10.1117/12.961118

8 November 2012 Improvement of lithographic performance and reduction of mask cost by simple OPC

Koichiro Tsujita, Koji Mikami, Hiroyuki Ishii, Tadashi Arai, Ryo Nakayama, Michael C. Smayling, Valery Axelrad, Hidetami Yaegashi, Kenichi Oyama

Author Affiliations +

Proceedings Volume 8522, Photomask Technology 2012; 852209 (2012) https://doi.org/10.1117/12.961118
Event: SPIE Photomask Technology, 2012, Monterey, California, United States

Abstract

An SMO whose optimized source shape and mask pattern can be simple is shown. However the simple solution can be competitive to a solution by complicated source shape and mask pattern. This technology is applied to cut pattern of 1 dimensional GDR layout of 20nm node and below. The simulation under ArF single exposure shows 16nm node of metal layer and 12nm node of gate layer can be resolved with rectangle mask patterns. For both layers bright field exposure is used and experimentally positive and negative tone developments are applied for metal layer (island patterns) and gate layer (cut patterns) respectively. The integrated process through SADP, etching, and so on is shown. It is found that the simple pattern has lower MEEF than the complicated ones. Applying simple mask pattern MEEF can be suppressed to be 3~4 even at 16nm node. The SEM images of the masks with simple and complicated shapes show that it is difficult to reproduce the complicated pattern accurately. We prepared mask data with various complexities of patterns and evaluated the writing time of an up-to-date EB writer. The time depends on the shot counts and a typical OPC pattern takes 4 times longer time than rectangle pattern. Since the cost of writing time is around 20% of the entire cost, the saved cost from OPC pattern to rectangle pattern becomes 15%. Regarding advanced node of mask with more complicated pattern it takes further longer time and there is an impact on other technologies of inspection or process. So the saved cost becomes huge.

Citation Download Citation

Koichiro Tsujita, Koji Mikami, Hiroyuki Ishii, Tadashi Arai, Ryo Nakayama, Michael C. Smayling, Valery Axelrad, Hidetami Yaegashi, and Kenichi Oyama "Improvement of lithographic performance and reduction of mask cost by simple OPC", Proc. SPIE 8522, Photomask Technology 2012, 852209 (8 November 2012); https://doi.org/10.1117/12.961118

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available