|
The E-beam Resist Test Facility (ERTF) has been established to fill the need for consortium-based testing of e-beam resists for mask writing applications on advanced mask writers out to the 11nm half-pitch node and beyond. SEMATECH and the College of Nanoscale Science and Engineering (CNSE) began establishing the ERTF in early 2012 to test e-beam resist samples from commercial suppliers and university labs against the required performance metrics for each application at the target node. Operations officially began on June 12, 2012, at which time the first e-beam resist samples were tested. The ERTF uses the process and metrology infrastructure available at CNSE, including a Vistec VB300 Vectorscan e-beam tool adjusted to operate at 50kv. Initial testing results show that multiple resists already meet, or are close to meeting, the resolution requirements for mask writing at the 11nm node, but other metrics such as line width roughness still need improvement. An overview of the ERTF and its capabilities is provided here. Tools, baseline processes, and operation strategy details are discussed, and resist testing and benchmarking results are shown. The long-term outlook for the ERTF and plans to expand capability and testing capacity, including resist testing for e-beam direct write lithography, are also discussed. |
ACCESS THE FULL ARTICLE
No SPIE Account? Create one
Photomasks
Photoresist processing
Semiconducting wafers
Metrology
Line width roughness
Silicon
Finite element methods
