Paper
27 November 2012 High stable single-polarization tunable fiber laser based on Opto-DMD processor and polarization-maintaining fiber devices
Kuizhi Huang, Binbin Yan, Xiao Chen, Genxiang Chen, Qi Ai, Kuiru Wang, Yiquan Wang, Ying Zhang, Feijun Song, Xinzhu Sang
Author Affiliations +
Abstract
A high stable wavelength-tunable fiber laser is experimentally demonstrated by using a digital-micromirror-device (DMD) processor and a polarization-maintaining erbium-doped fiber amplifier (EDFA).The electronic-addressed DMD processor is able to select and couple a waveband from of the polarization-maintaining EDFA back into the fiber ring to generate a narrow line-width laser output. The tunable fiber laser shows a line-width of 0.02nm, a tuning step of 0.08nm over the c-band and a side mode suppression ratio (SMSR) greater than 50 dB. The output power uniformity of 0.016dB is achieved by using the automatic power control (APC) system under room temperature. The center wavelength fluctuation during 1 hour is below 0.01 nm.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuizhi Huang, Binbin Yan, Xiao Chen, Genxiang Chen, Qi Ai, Kuiru Wang, Yiquan Wang, Ying Zhang, Feijun Song, and Xinzhu Sang "High stable single-polarization tunable fiber laser based on Opto-DMD processor and polarization-maintaining fiber devices", Proc. SPIE 8555, Optoelectronic Devices and Integration IV, 85551O (27 November 2012); https://doi.org/10.1117/12.981857
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Digital micromirror devices

Microelectromechanical systems

Optical amplifiers

Polarization

Control systems

Diffraction

Back to Top