Freeform mirror fabrication and metrology using a high performance test CGH and advanced alignment features

Sebastian Scheiding; Matthias Beier; Uwe-Detlef Zeitner; Stefan Risse; Andreas Gebhardt

doi:10.1117/12.2001690

5 March 2013 Freeform mirror fabrication and metrology using a high performance test CGH and advanced alignment features

Sebastian Scheiding, Matthias Beier, Uwe-Detlef Zeitner, Stefan Risse, Andreas Gebhardt

Author Affiliations +

Proceedings Volume 8613, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics VI; 86130J (2013) https://doi.org/10.1117/12.2001690
Event: SPIE MOEMS-MEMS, 2013, San Francisco, California, United States

Abstract

The metrology of mirrors with an off-axis aspheric or freeform shape can be based on optical testing using a Computer Generated Hologram as wavefront matching element in an interferometric setup. Since the setup can be understood as optical system consisting of multiple elements with six degrees of freedom each, the accuracy strongly depends on the alignment of the surface under test with respect to the transmission element of the interferometer and the micro optics of the CGH. A novel alignment approach for the relative positioning of the mirror and CGH in six degrees of freedom is reported. In the presented work, a proper alignment is achieved by illuminating alignment elements outside the Clear Aperture (CA) of the optical surface with the help of auxiliary holograms next to the test CGH on the substrate. The peripheral holograms on the CGH substrate are used to generate additional phase maps in the interferogram, that indicate positioning errors. Since the reference spheres represent the coordinate system of the mirror and are measured in the same precision as the optical surface, the registration and shape has to be appropriate to embody the mirrors coordinate system. The alignment elements on the mirror body are diamond machined using freeform turning or micro milling processes in the same machine setup used for the mirror manufacturing. The differences between the turning and milling of alignment lenses is discussed. The novel approach is applied to correct the shape error of a freeform mirror using ultra precision machining. The absolute measurement of the quality of freeform mirror shapes including tilt and optical power is possible using the presented alignment concept. For a better understanding, different metrology methods for aspheres and freeforms are reviewed. To verify the novel method of alignment and the measurement results, the freeform surface is also characterized using ultra high accuracy 2½D profilometry. The results of the different techniques for the absolute measurement of freeforms are compared.

Citation Download Citation

Sebastian Scheiding, Matthias Beier, Uwe-Detlef Zeitner, Stefan Risse, and Andreas Gebhardt "Freeform mirror fabrication and metrology using a high performance test CGH and advanced alignment features", Proc. SPIE 8613, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics VI, 86130J (5 March 2013); https://doi.org/10.1117/12.2001690

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available