Cascaded-systems analyses of the DQE of double-Z x-ray detectors including photoelectric, coherent and incoherent interactions

Seungman Yun; Jesse Tanguay; Ho Kyung Kim; Ian A. Cunningham

doi:10.1117/12.2007999

19 March 2013 Cascaded-systems analyses of the DQE of double-Z x-ray detectors including photoelectric, coherent and incoherent interactions

Seungman Yun, Jesse Tanguay, Ho Kyung Kim, Ian A. Cunningham

Author Affiliations +

Proceedings Volume 8668, Medical Imaging 2013: Physics of Medical Imaging; 86682L (2013) https://doi.org/10.1117/12.2007999
Event: SPIE Medical Imaging, 2013, Lake Buena Vista (Orlando Area), Florida, United States

Abstract

Image quality in diagnostic x-ray detectors is limited by statistical properties governing how, and where, x-ray energy is deposited in a detector. This in turn depends on the physics of underlying x-ray interactions, and the development of theoretical models of x-ray interaction physics is therefore a critical step in optimal detector design and assessment. While cascaded-systems analyses are often used to describe image signal and noise in many systems, it has always been assumed there is only a single element (single Z) with which all x rays interact even though most commonly used and promising candidates are compound materials. In addition, coherent and incoherent scattering and their effects on image quality are usually ignored but may be important in some situa- tion such as in low-Z atoms with high x-ray energies. We present a theoretical model of energy deposition within a double-Z x-ray detector material that addresses the nature of energy absorption following photoelectric and incoherent interactions and the effects of coherent scatter prior to energy deposition by photoelectric interactions. A cascaded systems approach is used to describe the transfer of signal and noise in terms of the modulation transfer function (MTF), Wiener noise power spectrum (NPS), and detective quantum efficiency (DQE). The model is validated by comparing Monte Carlo simulation results with CsI and PbI2 double-Z materials. Excellent agreement is obtained for each metric over the entire diagnostic energy range up to 10 cycles/mm. It is shown that in all cases tested, a combination of two single-Z models weighted by the atomic density of each atom type gives equivalent results to the more comprehensive double-Z model within a few percent. This result suggests the simpler model is adequate and may be preferred for the optimal design of conventional radiography detectors and the estimation of x-ray imaging performance of novel photoconductor materials.

Citation Download Citation

Seungman Yun, Jesse Tanguay, Ho Kyung Kim, and Ian A. Cunningham "Cascaded-systems analyses of the DQE of double-Z x-ray detectors including photoelectric, coherent and incoherent interactions", Proc. SPIE 8668, Medical Imaging 2013: Physics of Medical Imaging, 86682L (19 March 2013); https://doi.org/10.1117/12.2007999

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE