Translator Disclaimer
5 June 2013 An extended area blackbody for radiometric calibration
Author Affiliations +
SBIR is developing an enhanced blackbody for improved radiometric testing. The main feature of the blackbody is an improved coating with higher emissivity than the standard coating used. Comparative measurements of the standard and improved coatings are reported, including reflectance. The coatings were also tested with infrared imagers and a broadband emissivity estimate derived from the imagery data. In addition, a control algorithm for constant slew rate has been implemented, primarily for use in minimum resolvable temperature measurements. The system was tested over a range of slew rates from 0.05 K/min to 10 K/min and its performance reported.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joe LaVeigne, Greg Franks, Jake Singer, D. J. Arenas, and Steve McHugh "An extended area blackbody for radiometric calibration", Proc. SPIE 8706, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXIV, 870609 (5 June 2013);

Back to Top