Self-aligned single-mask fabrication process for electro-thermal microactuators using ICP-RIE

Ali B. Alamin Dow; Adel Gougam; Nazir P. Kherani; I. W. Rangelow

doi:10.1117/12.2015547

17 May 2013 Self-aligned single-mask fabrication process for electro-thermal microactuators using ICP-RIE

Ali B. Alamin Dow, Adel Gougam, Nazir P. Kherani, I. W. Rangelow

Proceedings Volume 8763, Smart Sensors, Actuators, and MEMS VI; 87632W (2013) https://doi.org/10.1117/12.2015547
Event: SPIE Microtechnologies, 2013, Grenoble, France

Abstract

Advances in the miniaturization of semiconductor devices have been made possible by new methods of microfabrication techniques . These advances have stimulated the birth of Micro Electro Mechanical Systems (MEMS) technology which enable the fabrication of a wide variety of sensing and actuating devices of microscopic dimensions . Of particular interest are thermal microactuators which provide large deflections and are compatible with existing IC technologies. In MEMS technology, a well controlled etching process is critical for the fabrication of structures with specific geometry and properties. Increasing demand for intricate semiconductor devices has fueled and motivated researches to develop high precision micromachining techniques . Inductively coupled plasma- Reactive ion etching (ICP-RIE) is capable of producing features with high aspect ratio as high as 90:1. Taking advantage of the notching effect when making a structure from silicon on insulator (SOI), structure release without the use of HF acid has been demonstrated. We report on the development of a self-aligned single-mask process for the fabrication of released and movable MEMS devices. ICP-RIE was used to realize the structures directly out of single crystal silicon. Applying side wall passivation, controlling the ratio of ion flux and radical flux, smooth etching profile can be obtained with high aspect ratio. No wet etching process is required to release the structures as is the case with SOI wafers. This approach overcomes the stiction limitation associated with wet etching and yields good thickness uniformity over the entire structure. Electrothermal microactuators with integrated microgrippers were designed, fabricated and characterized. harvesters.

Citation Download Citation

Ali B. Alamin Dow, Adel Gougam, Nazir P. Kherani, and I. W. Rangelow "Self-aligned single-mask fabrication process for electro-thermal microactuators using ICP-RIE", Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI, 87632W (17 May 2013); https://doi.org/10.1117/12.2015547

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Etching

Silicon

Microelectromechanical systems

Ions

Microactuators

Wet etching

Dry etching

Show All Keywords

Keywords/Phrases

Search In:

Publication Years