Iterative alignment of reflector segments using a laser tracker

Lizeth Cabrera Cuevas; Maribel Lucero Alvarez; Andrea Leon-Huerta; Emilio Hernandez Rios; Josefina Hernandez Lázaro; Carlos Tzile Torres; David Castro Santos; David M. Gale; Grant Wilson; Gopal Narayanan; David R. Smith

doi:10.1117/12.2020947

13 May 2013 Iterative alignment of reflector segments using a laser tracker

Lizeth Cabrera Cuevas, Maribel Lucero Alvarez, Andrea Leon-Huerta, Emilio Hernandez Rios, Josefina Hernandez Lázaro, Carlos Tzile Torres, David Castro Santos, David M. Gale, Grant Wilson, Gopal Narayanan, David R. Smith

Author Affiliations +

Proceedings Volume 8788, Optical Measurement Systems for Industrial Inspection VIII; 87882Y (2013) https://doi.org/10.1117/12.2020947
Event: SPIE Optical Metrology 2013, 2013, Munich, Germany

Abstract

The Large Millimeter Telescope (LMT) is a 50m diameter millimetre-wave radio telescope situated on the summit of Sierra Negra, Puebla, at an altitude of 4600 meters. The reflector surface of the LMT currently employs84 segments arranged in three annular rings. Each segment is comprised of 8 precision composite subpanels located on five threaded adjusters. During the current primary surface refurbishment, individual segments are aligned in the telescope basement using a laser tracker. This allows increased spatial resolution in shorter timescales, resulting in the opportunity for improved logistics and increased alignment precision. To perform segment alignment an iterative process is carried out whereby the surface is measured and subpanel deformations are corrected with the goal of 40 microns RMS. In practice we have been able to achieve RMS errors of almost 20 microns, with 35 microns typical. The number of iterations varies from around ten to over 20, depending mainly on the behaviour of the mechanical adjusters that support the individual subpanels. Cross marks scribed on the reflector surface are used as fiducials, because their positions on the paraboloid are well known. Measurement data is processed using a robust curve fitting algorithm which provides a map of the surface showing the subpanel deviations. From this map the required subpanel adjuster movements are calculated allowing surface improvement in a stepwise manner.

Citation Download Citation

Lizeth Cabrera Cuevas, Maribel Lucero Alvarez, Andrea Leon-Huerta, Emilio Hernandez Rios, Josefina Hernandez Lázaro, Carlos Tzile Torres, David Castro Santos, David M. Gale, Grant Wilson, Gopal Narayanan, and David R. Smith "Iterative alignment of reflector segments using a laser tracker", Proc. SPIE 8788, Optical Measurement Systems for Industrial Inspection VIII, 87882Y (13 May 2013); https://doi.org/10.1117/12.2020947

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available