Energy dispersive photon counting detectors for breast imaging

William C. Barber; Jan C. Wessel; Nail Malakhov; Gregor Wawrzyniak; Neal E. Hartsough; Thulasidharan Gandhi; Einar Nygard; Jan S. Iwanczyk

doi:10.1117/12.2030087

26 September 2013 Energy dispersive photon counting detectors for breast imaging

William C. Barber, Jan C. Wessel, Nail Malakhov, Gregor Wawrzyniak, Neal E. Hartsough, Thulasidharan Gandhi, Einar Nygard, Jan S. Iwanczyk

Author Affiliations +

Proceedings Volume 8853, Medical Applications of Radiation Detectors III; 885303 (2013) https://doi.org/10.1117/12.2030087
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

We report on our efforts toward the development of silicon (Si) strip detectors for energy-resolved clinical breast imaging. Typically, x-ray integrating detectors based on scintillating cesium iodide CsI(Tl) or amorphous selenium (a- Se) are used in most commercial systems. Recently, mammography instrumentation has been introduced based on photon counting silicon Si strip detectors. Mammography requires high flux from the x-ray generator, therefore, in order to achieve energy resolved single photon counting, a high output count rate (OCR) for the detector must be achieved at the required spatial resolution and across the required dynamic range for the application. The required performance in terms of the OCR, spatial resolution, and dynamic range must be obtained with sufficient field of view (FOV) for the application thus requiring the tiling of pixel arrays and scanning techniques. Room temperature semiconductors, operating as direct conversion x-ray sensors, can provide the required speed when connected to application specific integrated circuits (ASICs) operating at fast peaking times with multiple fixed thresholds per pixel, provided that the sensors are designed for rapid signal formation across the x-ray energy ranges of the application at the required energy and spatial resolutions. We present our methods and results from the optimization of prototype detectors based on Si strip structures. We describe the detector optimization and the development of ASIC readout electronics that provide the required spatial resolution, low noise, high count rate capabilities and minimal power consumption.

Citation Download Citation

William C. Barber, Jan C. Wessel, Nail Malakhov, Gregor Wawrzyniak, Neal E. Hartsough, Thulasidharan Gandhi, Einar Nygard, and Jan S. Iwanczyk "Energy dispersive photon counting detectors for breast imaging", Proc. SPIE 8853, Medical Applications of Radiation Detectors III, 885303 (26 September 2013); https://doi.org/10.1117/12.2030087

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available