Paper
1 October 2013 Dose variation and charging due to fogging in electron beam lithography: simulations using CHARIOT Monte Carlo software
Sergey Babin, Sergey Borisov, Elena Patyukova
Author Affiliations +
Proceedings Volume 8886, 29th European Mask and Lithography Conference; 88860E (2013) https://doi.org/10.1117/12.2032414
Event: 29th European Mask and Lithography Conference, 2013, Dresden, Germany
Abstract
The semiconductor maskmaking industry imposes challenging requirements for the uniformity of critical dimensions (CD) and placement error. In electron beam lithography (EBL), electrons backscatter from the resist and substrate, reach the bottom of objective lens and come back to the resist, causing undesirable exposure and charging far away from the point of exposure. This fogging effects both CD variation and placement accuracy in EBL. The Monte Carlo software CHARIOT was upgraded to be capable of simulating this fogging effect. The results of simulations are presented. It was found that Gaussian approximation is sufficient; the approximation parameters were found for various working distances. The results were used for the correction of charging placement error. Fogging is one of the major contributing factors to the charging placement error; the DISPLACE software tool predicts the displacement map for any layout, which allows for the correction of placement error in maskmaking.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergey Babin, Sergey Borisov, and Elena Patyukova "Dose variation and charging due to fogging in electron beam lithography: simulations using CHARIOT Monte Carlo software", Proc. SPIE 8886, 29th European Mask and Lithography Conference, 88860E (1 October 2013); https://doi.org/10.1117/12.2032414
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monte Carlo methods

Electron beam lithography

Objectives

Scattering

Optical simulations

Critical dimension metrology

Electrodes

Back to Top