Paper
21 August 2013 Simulation approach for the design of radiation-hardened Erbium doped fiber amplifiers
Jing Ma, Qingfeng Liu, Yanping Zhou, Siyuan Yu
Author Affiliations +
Proceedings Volume 8906, International Symposium on Photoelectronic Detection and Imaging 2013: Laser Communication Technologies and Systems; 890624 (2013) https://doi.org/10.1117/12.2034754
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China
Abstract
We investigate the sensitivity of fiber amplifiers to radiations and present an approach to design radiation hardened rare-earth doped fiber amplifiers. This paper includes testing experiments on comparing the radiation responses (200krad electron irradiation) of fiber amplifiers made with same lengths of different rare-earth doped fibers. Simulation tools can also be used to improve the tolerance of the fiber amplifiers by helping identifying the best performance for operation in harsh environment, simulation analysis figured that fiber length of the amplifier should be optimized to reduce the radiation-induced losses around the signal wavelength that strongly impact the fiber response. By using this particular approach, fiber amplifiers with little insensitivity to radiations could be manufactured in the future.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jing Ma, Qingfeng Liu, Yanping Zhou, and Siyuan Yu "Simulation approach for the design of radiation-hardened Erbium doped fiber amplifiers", Proc. SPIE 8906, International Symposium on Photoelectronic Detection and Imaging 2013: Laser Communication Technologies and Systems, 890624 (21 August 2013); https://doi.org/10.1117/12.2034754
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Optical amplifiers

Optical simulations

Computer simulations

Tolerancing

Amplifiers

Erbium

RELATED CONTENT

Defect engineering in doped silica fiber are there good...
Proceedings of SPIE (February 15 1994)
Large Signal Modelling Of An Erbium Doped Fibre Amplifier
Proceedings of SPIE (February 15 1990)
Optimization of the WDM coupler in EDFAs with 1480 nm...
Proceedings of SPIE (February 15 1994)
Method for measuring erbium-doped fiber parameters
Proceedings of SPIE (October 21 2004)
Two stage single pump Er doped fiber amplifier with 55...
Proceedings of SPIE (February 23 2007)

Back to Top