Paper
19 March 2014 X-ray pulsing methods for reduced-dose computed tomography in PET/CT attenuation correction
Author Affiliations +
Abstract
The image quality needed for CT-based attenuation correction (CTAC) is significantly lower than what is used currently for diagnostic CT imaging. Consequently, the X-ray dose required for sufficient image quality with CTAC is relatively small, potentially smaller than the lowest X-ray dose clinical CT scanners can provide. Operating modes have been proposed in which the X-rays are periodically turned on and off during the scan in order to reduce X-ray dose. This study reviews the different methods by which X-rays can be modulated in a CT scanner, and assesses their adequacy for lowdose acquisitions as required for CTAC. Calculations and experimental data are provided to exemplify selected X-ray pulsing scenarios. Our analysis shows that low-dose pulsing is possible but challenging with clinically available CT tubes. Alternative X-ray tube designs would lift this restriction.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Uwe Wiedmann, V. Bogdan Neculaes, Dan Harrison, Evren Asma, Paul E. Kinahan, and Bruno De Man "X-ray pulsing methods for reduced-dose computed tomography in PET/CT attenuation correction", Proc. SPIE 9033, Medical Imaging 2014: Physics of Medical Imaging, 90332Z (19 March 2014); https://doi.org/10.1117/12.2043021
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

X-ray computed tomography

Electrons

Optical filters

Switching

Capacitance

Signal attenuation

Back to Top