Tracking defectivity of EUV and SADP processing using bright-field inspection

Nadine Alexis; Chris Bencher; Yongmei Chen; Huixiong Dai; Kfir Dotan; Dale Huang; Alison Nalven; Chris Ngai; Gaetano Santoro; Bharath Vijayaraghavan; Peng Xie; Jun Xue

doi:10.1117/12.2048356

2 April 2014 Tracking defectivity of EUV and SADP processing using bright-field inspection

Nadine Alexis, Chris Bencher, Yongmei Chen, Huixiong Dai, Kfir Dotan, Dale Huang, Alison Nalven, Chris Ngai, Gaetano Santoro, Bharath Vijayaraghavan, Peng Xie, Jun Xue

Author Affiliations +

Proceedings Volume 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII; 905030 (2014) https://doi.org/10.1117/12.2048356
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

The purpose of this study is to understand EUV+SADP defectivity in 15nm line and space (L&S) pattern, and to examine bright-field inspection capabilities at the 1Xnm node. Programmed defects of known size, shape, and location were printed in dense patterned areas using EUV lithography at IMEC. To track these defects throughout development, a defectivity study was conducted using bright-field inspection after four SADP processing steps. The smallest defect routinely detected had a programmed size of 14nm, and the defect signal was enhanced using polarized light. By comparing defect locations at the beginning and end stages of development, it was found that 95% of defects remained the same. This illustrates the importance of post-lithography wafer inspection. This research shows how defect characteristics on the EUV mask affect the final pattern and demonstrate the sensitivity of bright-field inspection at the 1Xnm node.

Citation Download Citation

Nadine Alexis, Chris Bencher, Yongmei Chen, Huixiong Dai, Kfir Dotan, Dale Huang, Alison Nalven, Chris Ngai, Gaetano Santoro, Bharath Vijayaraghavan, Peng Xie, and Jun Xue "Tracking defectivity of EUV and SADP processing using bright-field inspection", Proc. SPIE 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII, 905030 (2 April 2014); https://doi.org/10.1117/12.2048356

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available