Paper
9 March 2014 Optimal design of a jetting dispenser actuated by a dual piezoactuator
Quoc Hung Nguyen, Jun Cheol Jeon, Seung-Bok Choi
Author Affiliations +
Abstract
This research work focuses on optimal design of a high frequency jetting dispenser actuated by two piezoactuators. Firstly, a new configuration of the high frequency jetting dispenser for integrated circuits (ICs) fabricating is proposed. The optimal design of the jetting dispenser is then considered. In the optimal design, significant parts of the jetting dispenser such as the needle, the nozzle, the piezoactuators, the displacement amplification lever and return spring are considered. Firstly, the geometry of the nozzle and needle is optimally designed considering the maximum velocity of dispensed adhesive. The other significant parts of the jetting dispenser such as the piezoactuators, return springs and the amplifying lever are designed so that the jetting dispenser has a compact size and can work well at 1000Hz. In addition, the amplitude of needle motion can reach up to 0.3mm.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Quoc Hung Nguyen, Jun Cheol Jeon, and Seung-Bok Choi "Optimal design of a jetting dispenser actuated by a dual piezoactuator", Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems 2014, 90572U (9 March 2014); https://doi.org/10.1117/12.2044560
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Adhesives

Actuators

Head

Finite element methods

Integrated circuits

Manufacturing

Mechanical engineering

Back to Top