Piezoelectric energy harvesting using a series synchronized switch technique

Yang Li; Mickaël Lallart; Claude Richard

doi:10.1117/12.2044899

Translator Disclaimer

1 April 2014 Piezoelectric energy harvesting using a series synchronized switch technique

Yang Li, Mickaël Lallart, Claude Richard

Author Affiliations +

Proceedings Volume 9057, Active and Passive Smart Structures and Integrated Systems 2014; 90572X (2014) https://doi.org/10.1117/12.2044899
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

An alternative switching technique for piezoelectric energy harvesting is presented. The energy harvester based on piezoelectric elements is a promising method to scavenge ambient energy. Several non-linear techniques such as SSHI have been implemented to improve the global harvested energy. However, these techniques are sensitive to load and should be tuned to obtain optimal power output. This technique, called Series Synchronized Switch Harvesting (S3H), has both the advantage of easy implementation and independence of the harvested power with the load impedance. The harvesting circuit simply consists of a switch in series with the piezoelement and the load. The switch is nearly always open and is triggered-on each time the piezoelectric voltage reaches an extremum. It is opened back after an arbitrary on-time t₀. The energy scavenging process happens when switch is closed. Based on linear motion assumption, the harvester structure is modeled as a “Mass-Spring-Damper” system. The analysis of S3H technique is considered with harmonic excitation. An analytical model of S3H is presented and discussed. The main advantage of this approach compared with the usual standard technique is that the extracted power is independent of the load within a wide range of load impedance, and that the useful impedance range is simply related to the defined switch on-time. For constant displacement excitation condition, the optimal power output is more than twice the power extracted by the standard technique as long as the on-time interval is small comparatively with the vibration period. For constant force excitation, an optimal on-time can be defined resulting in an optimally wide load bandwidth. Keywords: piezoelectric; energy harvesting; non-linear harvesting techniques; switching techniques.

Citation Download Citation

Yang Li, Mickaël Lallart, and Claude Richard "Piezoelectric energy harvesting using a series synchronized switch technique", Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems 2014, 90572X (1 April 2014); https://doi.org/10.1117/12.2044899

ACCESS THE FULL ARTICLE