Paper
23 May 2014 Underwater pressure measurement using fibre optic extrinsic Fabry-Perot interferometric (EFPI) sensors
Author Affiliations +
Abstract
A fibre optic extrinsic Fabry Perot Interferometer (EFPI) sensor is developed for monitoring pressure in the underwater and sub-seabed under simulated conditions. The sensor is robust in design and is fabricated entirely from Silica glass. The EFPI is formed at the tip of the fibre, where the single mode is spliced to a 200μm capillary, sealed by a 200μm Multimode, which forms the diaphragm. The diaphragm thickness is reduced by polishing and etching with hydrofluoric (HF) acid to about 2-3μm for a high sensitivity. The thickness of the diaphragm is monitored online during polishing and HF etching. The spectrum of the fibre optic sensor (FOS) is interrogated using a broad band optical light source and an optical spectrometer. The sensitivity of the sensor achieved is 0.6cmH2O, excellent for small depth-changes. Experimental measurements with saturated salt water and chlorophyll pigmentation of different standards were tested, to simulate the sub-sea conditions where a stability of 0.7cmH2O was reached with a drift of less than 10% under the simulated conditions.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dinesh Babu Duraibabu, Sven Poeggel, Elfed Lewis, and Thomas Newe "Underwater pressure measurement using fibre optic extrinsic Fabry-Perot interferometric (EFPI) sensors", Proc. SPIE 9111, Ocean Sensing and Monitoring VI, 911111 (23 May 2014); https://doi.org/10.1117/12.2050162
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Capillaries

Polishing

Fiber optics

Glasses

Interfaces

Interferometry

Back to Top