Translator Disclaimer
8 July 2014 An update on the development of IO:I: a NIR imager for the Liverpool Telescope
Author Affiliations +
IO:I is a new instrument in development for the Liverpool Telescope, extending current imaging capabilities beyond the optical and into the near infrared. Cost has been minimised by use of a previously decommissioned instrument’s dewar as the base for a prototype, and retrofitting it with a 1.7μm cutoff Hawaii-2RG HgCdTe detector, SIDECAR ASIC controller and JADE2 interface card. Development of this prototype is nearing completion and will be operational mid 2014. In this paper, the mechanical, electronic and cryogenic facets of the dewar retrofitting process will be discussed together with a description of the instrument control system software/hardware setup. Finally, a brief overview of some initial testing undertaken on the engineering grade array will be given, along with future commissioning plans for the instrument.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. M. Barnsley, I. A. Steele, S. D. Bates, and C. J. Mottram "An update on the development of IO:I: a NIR imager for the Liverpool Telescope", Proc. SPIE 9147, Ground-based and Airborne Instrumentation for Astronomy V, 914737 (8 July 2014);


Tracking subsystem of the SOFIA telescope
Proceedings of SPIE (June 20 2000)
SHARP prototype system demonstration program
Proceedings of SPIE (November 15 2002)
Euclid NISP thermal control design
Proceedings of SPIE (September 21 2012)
E-ELT M1 test facility
Proceedings of SPIE (September 17 2012)
The OmegaCAM 16K x 16K CCD detector system for the...
Proceedings of SPIE (June 15 2006)

Back to Top