Translator Disclaimer
28 July 2014 ESPRESSO front end: modular opto-mechanical integration for astronomical instrumentation
Author Affiliations +
The opto-mechanical conceptual design for the Front-End unit and the calibration unit of the ESPRESSO Spectrograph is described in this paper. The front end system exploits a modular concept. Each FEU receive the beam directly from the relative Telescope Coudé Train and the calibration light from the calibration unit. On the other side the FEU feeds the fibers that carry the light to the spectrograph, corresponding in number and size to the scientific observing modes conceived for Espresso. The selection is made through a Toggling Unit. Purpose of the Front/End is to provide the needed connection between the input signal, i.e. Object light, Sky light, Calibration light, and the given output fiber in any of the foreseen observing modes.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Riva, Matteo Aliverti, Manuele Moschetti, M. Landoni, S. Dell'Agostino, F. Pepe, D. Mégevand, F. M. Zerbi, S. Cristiani, and A. Cabral "ESPRESSO front end: modular opto-mechanical integration for astronomical instrumentation", Proc. SPIE 9147, Ground-based and Airborne Instrumentation for Astronomy V, 91477G (28 July 2014);


EXPRES a next generation RV spectrograph in the search...
Proceedings of SPIE (August 09 2016)
Optical design of the ESPRESSO spectrograph at VLT
Proceedings of SPIE (July 14 2010)
Deploying the testbed for the VLT adaptive optics facility ...
Proceedings of SPIE (September 13 2012)
MUSE optical alignment procedure
Proceedings of SPIE (September 24 2012)

Back to Top