Paper
19 August 2014 Optics and cryogenics for the 1.1 THz multi-pixel heterodyne receiver for APEX
Norma Hurtado, Urs U. Graf, Henning Adams, C. E. Honingh, Karl Jacobs, Patrick Pütz, Rolf Güsten, Jürgen Stutzki
Author Affiliations +
Abstract
The 1.1 THz multi-pixel heterodyne receiver will be mounted in the Nasmyth A cabin of the 12 m APEX telescope on the Chajnantor plateau, 5000 meters altitude in northern Chile. The receiver will cover the spectral window of 1000 - 1080 GHz, where important spectral lines like CO 9-8 at 1036.9 GHz, a tracer of warm and dense gas and OH+ at 1033 GHz and NH+ at 1012.6 GHz, both important for the study of chemical networks in the ISM, are located. The multi-pixel receiver greatly enhances the science output under the difficult observing conditions in this frequency range. Two 9-pixel focal plane sub-arrays on orthogonal polarizations are installed in easily removable cartridges. We developed a new thermal link to connect the cartridges to the cryostat. Our thermal link is an all-metal design: aluminum and Invar. All the optics is fully reflective, thus avoiding the absorption and reflection losses of dielectric lenses and reducing standing waves in the receiver. To guaranty internal optics alignment, we employ a monolithic integrated optics approach for the cold optics and the Focal Plane Unit (FPU) optics modeled after the CHARM (Compact Heterodyne Array Receiver Module) concept. The receiver uses synthesizer-driven solid-state local oscillators (LO) and the mixers will be balanced SIS mixers, which are essentially based on the design of the on-chip balanced SIS mixers at 490 GHz developed in our institute. Singleended HEB mixers are used for the laboratory tests of the optics. The LO power distribution is accommodated behind the FPU optics. It is composed of the LO optics, which includes a collimating Fourier grating, and an LO distribution plate to supply LO signal to each of the 9 pixels of the sub-array. Different options for the LO coupling design and fabrication are being analyzed and will be based on in-house hybrid waveguide/planar technology. We summarize the receiver project with emphasis on the cryogenics and the optics and present laboratory test results of the cryogenics, including the thermal link's performance. Beam pattern measurements of the receiver optics are scheduled for the coming days, but unfortunately could not be included in the current paper.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Norma Hurtado, Urs U. Graf, Henning Adams, C. E. Honingh, Karl Jacobs, Patrick Pütz, Rolf Güsten, and Jürgen Stutzki "Optics and cryogenics for the 1.1 THz multi-pixel heterodyne receiver for APEX", Proc. SPIE 9153, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII, 915327 (19 August 2014); https://doi.org/10.1117/12.2055563
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

Mirrors

Telescopes

Terahertz radiation

Aluminum

Computer aided design

Heterodyning

RELATED CONTENT

Forecast for HEAT on Dome A, Antarctica the High...
Proceedings of SPIE (September 28 2004)
Superconducting integrated receiver development for TELIS
Proceedings of SPIE (October 21 2005)
1.4-THz receiver for APEX and for GREAT on SOFIA
Proceedings of SPIE (October 08 2004)
First results from DesertSTAR a 7 pixel 345 GHz...
Proceedings of SPIE (October 08 2004)
Desert STAR a 7 pixel 345 GHz heterodyne array...
Proceedings of SPIE (February 17 2003)

Back to Top