Paper
2 June 2014 Wind tunnel unsteady pressure measurements using a differential optical fiber Fabry-Perot pressure sensor
Ricardo Correia, Stephen E. Staines, Stephen W. James, Nicholas Lawson, Kevin Garry, Ralph P. Tatam
Author Affiliations +
Proceedings Volume 9157, 23rd International Conference on Optical Fibre Sensors; 915709 (2014) https://doi.org/10.1117/12.2059631
Event: OFS2014 23rd International Conference on Optical Fiber Sensors, 2014, Santander, Spain
Abstract
A differential extrinsic optical fiber Fabry-Perot based pressure sensor has been developed and benchmarked against a conventional piezoresistive Kulite pressure sensor. The sensors were placed on the fuselage of a 1:10/3 sub-scale model of a Scottish aviation Bulldog, which was placed in a wind-tunnel. Pressure tappings that surrounded the sensors aided the mapping of pressure distribution around this section of the fuselage. The results obtained from the fibre optic pressure sensor are in good agreement with those obtained from the Kulite and from the pressure tappings.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ricardo Correia, Stephen E. Staines, Stephen W. James, Nicholas Lawson, Kevin Garry, and Ralph P. Tatam "Wind tunnel unsteady pressure measurements using a differential optical fiber Fabry-Perot pressure sensor", Proc. SPIE 9157, 23rd International Conference on Optical Fibre Sensors, 915709 (2 June 2014); https://doi.org/10.1117/12.2059631
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

3D modeling

Fabry–Perot interferometers

Optical fibers

Reverse modeling

Protactinium

Solid modeling

Back to Top