Experimental characterization of variable output refractive beamshapers using freeform elements

Jason A. Shultz; Paul J. Smilie; Brian S. Dutterer; Matthew A. Davies; Thomas J. Suleski

doi:10.1117/12.2062030

25 September 2014 Experimental characterization of variable output refractive beamshapers using freeform elements

Jason A. Shultz, Paul J. Smilie, Brian S. Dutterer, Matthew A. Davies, Thomas J. Suleski

Proceedings Volume 9194, Laser Beam Shaping XV; 91940M (2014) https://doi.org/10.1117/12.2062030
Event: SPIE Optical Engineering + Applications, 2014, San Diego, California, United States

Abstract

We present experimental results from variable output refractive beam shapers based on freeform optical surfaces. Two freeform elements in close proximity comprise a beam shaper that maps a circular Gaussian input to a circular ‘flat-top’ output. Different lateral relative shifts between the elements result in a varying output diameter while maintaining the uniform irradiance distribution. We fabricated the beam shaping elements in PMMA using multi-axis milling on a Moore Nanotech 350FG diamond machining center and tested with a 632.8 nm Gaussian input. Initial optical testing confirmed both the predicted beam shaping and variable functionality, but with poor output uniformity. The effects of surface finish on optical performance were investigated using LightTrans VirtualLab^TM to perform physical optics simulations of the milled freeform surfaces. These simulations provided an optimization path for determining machining parameters to improve the output uniformity of the beam shaping elements. A second variable beam shaper based on a super-Gaussian output was designed and fabricated using the newly determined machining parameters. Experimental test results from the second beam shaper showed outputs with significantly higher quality, but also suggest additional areas of study for further improvements in uniformity.

Citation Download Citation

Jason A. Shultz, Paul J. Smilie, Brian S. Dutterer, Matthew A. Davies, and Thomas J. Suleski "Experimental characterization of variable output refractive beamshapers using freeform elements", Proc. SPIE 9194, Laser Beam Shaping XV, 91940M (25 September 2014); https://doi.org/10.1117/12.2062030

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available