You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
18 August 2014Glass bottle inspection by using digital in-line holography
In this paper, the novel technique for investigating the quality of glass bottle by using digital in-line holography (DIH)
has been proposed. In our experimental setup, the collimated beam of short coherent laser diode with wave length of 635
nm incident on a glass bottle. Then, the image bearing reflected beam consisted of quality profile of the glass bottle has
been recorded on a CMOS camera. By using the experimental results and numerically reconstructed images, the defects
inside the glass bottle can be detected and the curvature radius of the bottle has been found. Our technique may be used
for glass bottle inspection in the glass bottle making industry.
The alert did not successfully save. Please try again later.
Prathan Buranasiri, Suwan Plaipichit, "Glass bottle inspection by using digital in-line holography," Proc. SPIE 9204, Interferometry XVII: Advanced Applications, 92040K (18 August 2014); https://doi.org/10.1117/12.2061860