Defects caused by blank masks and repair solution with nanomachining for 20nm node

HyeMi Lee; ByungJu Kim; MunSik Kim; HoYong Jung; Sang Pyo Kim; DongGyu Yim

doi:10.1117/12.2066278

16 September 2014 Defects caused by blank masks and repair solution with nanomachining for 20nm node

HyeMi Lee, ByungJu Kim, MunSik Kim, HoYong Jung, Sang Pyo Kim, DongGyu Yim

Author Affiliations +

Proceedings Volume 9235, Photomask Technology 2014; 92350G (2014) https://doi.org/10.1117/12.2066278
Event: SPIE Photomask Technology, 2014, Monterey, California, United States

Abstract

As the number of masks per wafer product set is increasing and low k1 lithography requires tight mask specifications, the patterning process below sub 20nm tech. node for critical layers will be much more expensive compared with previous tech. generations. Besides, the improved resolution and the zero defect level are necessary to meet tighter specifications on a mask and these resulted in the increased the blank mask price as well as the mask fabrication cost. Unfortunately, in spite of expensive price of blank masks, the certain number of defects on the blank mask is transformed into the mask defects and its ratio is increased. But using high quality blank mask is not a good idea to avoid defects on the blank mask because the price of a blank mask is proportional to specifications related to defect level. Furthermore, particular defects generated from the specific process during manufacturing a blank mask are detected as a smaller defect than real size by blank inspection tools because of its physical properties. As a result, it is almost impossible to prevent defects caused by blank masks during the mask manufacturing. In this paper, blank defect types which is evolved into mask defects and its unique characteristics are observed. Also, the repair issues are reviewed such as the pattern damage according to the defect types and the repair solution is suggested to satisfy the AIMS (Arial Image Measurement System) specification using a nanomachining tool.

Citation Download Citation

HyeMi Lee, ByungJu Kim, MunSik Kim, HoYong Jung, Sang Pyo Kim, and DongGyu Yim "Defects caused by blank masks and repair solution with nanomachining for 20nm node", Proc. SPIE 9235, Photomask Technology 2014, 92350G (16 September 2014); https://doi.org/10.1117/12.2066278

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Photomasks

Inspection

Particles

Scanning electron microscopy

Chromium

Image processing

Manufacturing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years