Paper
2 September 2014 The effect of spin coating parameters on the performance of PTB7/PC71BM polymer solar cells
Jie Li, Shu-guang Li, Yi-fan Zheng, Jun-Sheng Yu
Author Affiliations +
Proceedings Volume 9284, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronics Materials and Devices for Sensing and Imaging; 92840C (2014) https://doi.org/10.1117/12.2069740
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
We fabricated the inverted polymer solar cells (PSCs) with a structure of ITO/ZnO/PTB7:PC71BM/MoO3/Ag, and investigate the influence of spin coating on the device performance in this article. Through modifying the spin coating parameters, the high PSC performance could be obtained with VOC=0.769 (V), JSC=11.6 (mA/cm2), FF=58.8 % and PCE=5.26 %, respectively. The improvement of device performance was attributed to the enhanced absorption of active layer in the wavelength from 550 nm to 700 nm and the increased phase separation of PTB7:PC71BM.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jie Li, Shu-guang Li, Yi-fan Zheng, and Jun-Sheng Yu "The effect of spin coating parameters on the performance of PTB7/PC71BM polymer solar cells", Proc. SPIE 9284, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronics Materials and Devices for Sensing and Imaging, 92840C (2 September 2014); https://doi.org/10.1117/12.2069740
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Polymers

Absorption

Solar cells

Solar energy

Silver

Lithium

Back to Top