You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
17 July 2014Teaching optical dimensional metrology of surfaces and international standards
Dimensional metrology is a demanding subject that requires an in-depth knowledge not only of the characteristics of the object of the measurement and the method and system to be used to perform the measurement but also of the standards to followed and strictly respected. This is especially true for surface metrology. The definition of surface, particularly when using optical methods in the measuring process, is a first problem to be understood. From this definition discussion, in our pedagogical approach, we move to the study of the characteristics of light and light/matter/surface interaction. Surface characterization parameters and the main ISO standards are studied. Particular attention is given within the study of the sensing/measuring processes to the definition of uncertainty of a measurement. ISO’ Guide of Expression of Uncertainty of a Measurement, GUM, is studied (as well as the VIM). A review of the main optical surface inspection system is made. We believe on the importance of an active student centred learning and on the resource to hands-on experimental practice and therefore all this teaching approach evolves from practical examples and actual experiments and observations.
Costa: TEACHING OPTICAL DIMENSIONAL METROLOGY OF SURFACES AND INTERNATIONAL STANDARDS
Manuel F. M. Costa
"Teaching optical dimensional metrology of surfaces and international standards", Proc. SPIE 9289, 12th Education and Training in Optics and Photonics Conference, 92890F (17 July 2014); https://doi.org/10.1117/12.2070749
The alert did not successfully save. Please try again later.
Manuel F. M. Costa, "Teaching optical dimensional metrology of surfaces and international standards," Proc. SPIE 9289, 12th Education and Training in Optics and Photonics Conference, 92890F (17 July 2014); https://doi.org/10.1117/12.2070749