High efficient biofluid micromixing using ultra-fast AC electrothermal flow

Alinaghi Salari; Colin Dalton

doi:10.1117/12.2081573

5 March 2015 High efficient biofluid micromixing using ultra-fast AC electrothermal flow

Alinaghi Salari, Colin Dalton

Proceedings Volume 9320, Microfluidics, BioMEMS, and Medical Microsystems XIII; 93201C (2015) https://doi.org/10.1117/12.2081573
Event: SPIE BiOS, 2015, San Francisco, California, United States

Abstract

Electrokinetics have been widely used in lab-on-a-chip devices for fluid manipulation applications. The AC electrothermal (ACET) effect is a highly efficient technique for biofluids (σ>0.1 S/m) active micromixing, which can be used in chemical, biological, and medical analysis systems. In this paper, a novel idea of employing microelectrode arrays placed on sidewalls of a fluidic microchannel for increasing the mixing efficiency of biofluids is numerically investigated. It was reported that coplanar asymmetric microelectrode arrays are capable of creating ACET vortices in the bulk of a high conductive electrolyte solution. Two electrode arrays can be placed on the sidewalls of a microchannel, each of which has a different role, one pumps the biofluid while the other mixes it. Two different actuation patterns were applied to the electrodes. One pair of microelectrodes was simulated and the simulation procedure was then verified by conducting experiments for ACET flow measurement in a similar geometry. Microelectrode arrays were fabricated on 1mm thick glass substrates using photolithography. A 800 μm thick fluidic microchannel was fabricated by soft lithography of Polydimethylsiloxane (PDMS). The results showed that such a technique can dramatically increase the mixing of the solution while pumping is taking place. The mechanism was capable of efficiently mixing biofluid solutions (resultant concentration ratio of up to 80%) in a short time (<3 min) and short distance (<600 μm) for a 300×300 μm2 fluidic microchannel cross section area. Medical analysis such as heterogeneous immunoassays can be potential applications of such micromixing technique.

Citation Download Citation

Alinaghi Salari and Colin Dalton "High efficient biofluid micromixing using ultra-fast AC electrothermal flow", Proc. SPIE 9320, Microfluidics, BioMEMS, and Medical Microsystems XIII, 93201C (5 March 2015); https://doi.org/10.1117/12.2081573

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available