high power laser beam melting of Ti-6Al-4V on formed sheet metal to achieve hybrid structures

Bhrigu Ahuja; Adam Schaub; Michael Karg; Roman Schmidt; Marion Merklein; Michael Schmidt

doi:10.1117/12.2082919

16 March 2015 High power laser beam melting of Ti₆Al₄V on formed sheet metal to achieve hybrid structures

Bhrigu Ahuja, Adam Schaub, Michael Karg, Roman Schmidt, Marion Merklein, Michael Schmidt

Proceedings Volume 9353, Laser 3D Manufacturing II; 93530X (2015) https://doi.org/10.1117/12.2082919
Event: SPIE LASE, 2015, San Francisco, California, United States

Abstract

Motivated by the desire to combine the advantages of two manufacturing concepts, namely Additive Manufacturing and sheet metal forming, the concept of hybrid processes emerged. Laser Beam Melting process with its characteristic layer by layer fabrication methodology has already been proved to be successful in fabricating fully dense 3D structures with micro sized Ti₆Al₄V powder. The presented research focuses on direct fabrication of Ti₆ Al₄V Additive Structures on a thin pre-formed Ti₆ Al₄V sheet metal substrate. In the state of the art Laser Beam Melting process, fabrication of solid structures is done on a support structure attached to a thick conventionally manufactured base plate. The state of the art process also uses a 200°C pre-heating of the fabrication platform in order to reduce the effect of heat induced stresses on the fabricated structures. Within the hybrid fabrication concept, 3D structures are directly fabricated on a thin sheet metal and the thermodynamic conditions are significantly different in comparison to the conventional process. The research aims at understanding the fundamental aspects of the interaction between the formed sheet metal and additive structure determines the corresponding mechanical characteristics. The interaction process during the fabrication exposes the alloy locally to non-optimum thermal cycles and the research therefore aims to understand the various influencing factors involved during the fabrication process. The system technology modifications required to achieve the aimed fabrication are also discussed in the presented research.

Citation Download Citation

Bhrigu Ahuja, Adam Schaub, Michael Karg, Roman Schmidt, Marion Merklein, and Michael Schmidt "High power laser beam melting of Ti₆Al₄V on formed sheet metal to achieve hybrid structures", Proc. SPIE 9353, Laser 3D Manufacturing II, 93530X (16 March 2015); https://doi.org/10.1117/12.2082919

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available