Paper
8 February 2015 Interband cascade lasers with high CW power and brightness
M. Kim, C. S. Kim, W. W. Bewley, C. D. Merritt, C. L. Canedy, J. Abell, I. Vurgaftman, J. R. Meyer
Author Affiliations +
Abstract
We report corrugated narrow-ridge interband cascade lasers emitting at λ ≈ 3.5 mm that have been fabricated using CH4/Cl2- and BCl3-based inductively coupled plasma reactive ion etch processes, with largely similar results from both types of etches. The highest brightness figure of merit was obtained at intermediate ridge width (28 mm), for which the maximum cw output power at T = 25 °C was 522 mW and the corresponding wallplug efficiency and beam quality factor were 10.3% and M2 = 3.1, respectively. The high output power may be attributed to a 7-stage design that employs thicker separate confinement layers for lower internal loss.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Kim, C. S. Kim, W. W. Bewley, C. D. Merritt, C. L. Canedy, J. Abell, I. Vurgaftman, and J. R. Meyer "Interband cascade lasers with high CW power and brightness", Proc. SPIE 9370, Quantum Sensing and Nanophotonic Devices XII, 937029 (8 February 2015); https://doi.org/10.1117/12.2081929
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Continuous wave operation

Quantum cascade lasers

Reactive ion etching

Methane

Coating

Gold

Back to Top