Large-aperture MOEMS Fabry-Perot interferometer for miniaturized spectral imagers

Anna Rissanen; Andreas Langner; Kai H. Viherkanto; Rami Mannila

doi:10.1117/12.2075308

Translator Disclaimer

27 February 2015 Large-aperture MOEMS Fabry-Perot interferometer for miniaturized spectral imagers

Anna Rissanen, Andreas Langner, Kai H. Viherkanto, Rami Mannila

Author Affiliations +

Proceedings Volume 9375, MOEMS and Miniaturized Systems XIV; 93750J (2015) https://doi.org/10.1117/12.2075308
Event: SPIE OPTO, 2015, San Francisco, California, United States

Abstract

VTT’s optical MEMS Fabry-Perot interferometers (FPIs) are tunable optical filters, which enable miniaturization of spectral imagers into small, mass producible hand-held sensors with versatile optical measurement capabilities. FPI technology has also created a basis for various hyperspectral imaging instruments, ranging from nanosatellites, environmental sensing and precision agriculture with UAVs to instruments for skin cancer detection. Until now, these application demonstrations have been mostly realized with piezo-actuated FPIs fabricated by non-monolithical assembly method, suitable for achieving very large optical apertures and with capacity to small-to-medium volumes; however large-volume production of MEMS manufacturing supports the potential for emerging spectral imaging applications also in large-volume applications, such as in consumer/mobile products. Previously reported optical apertures of MEMS FPIs in the visible range have been up to 2 mm in size; this paper presents the design, successful fabrication and characterization of MEMS FPIs for central wavelengths of λ = 500 nm and λ = 650 nm with optical apertures up to 4 mm in diameter. The mirror membranes of the FPI structures consist of ALD (atomic layer deposited) TiO₂-Al₂O₃ λ/4- thin film Bragg reflectors, with the air gap formed by sacrificial polymer etching in O2 plasma. The entire fabrication process is conducted below 150 °C, which makes it possible to monolithically integrate the filter structures on other ICdevices such as detectors. The realized MEMS devices are aimed for nanosatellite space application as breadboard hyperspectral imager demonstrators.

Citation Download Citation

Anna Rissanen, Andreas Langner, Kai H. Viherkanto, and Rami Mannila "Large-aperture MOEMS Fabry-Perot interferometer for miniaturized spectral imagers", Proc. SPIE 9375, MOEMS and Miniaturized Systems XIV, 93750J (27 February 2015); https://doi.org/10.1117/12.2075308

ACCESS THE FULL ARTICLE