Monte Carlo simulation of inverse geometry x-ray fluoroscopy using a modified MC-GPU framework

David A. P. Dunkerley; Michael T. Tomkowiak; Jordan M. Slagowski; Bradley P. McCabe; Tobias Funk; Michael A. Speidel

doi:10.1117/12.2081684

18 March 2015 Monte Carlo simulation of inverse geometry x-ray fluoroscopy using a modified MC-GPU framework

David A. P. Dunkerley, Michael T. Tomkowiak, Jordan M. Slagowski, Bradley P. McCabe, Tobias Funk, Michael A. Speidel

Author Affiliations +

Proceedings Volume 9412, Medical Imaging 2015: Physics of Medical Imaging; 94120S (2015) https://doi.org/10.1117/12.2081684
Event: SPIE Medical Imaging, 2015, Orlando, Florida, United States

Abstract

Scanning-Beam Digital X-ray (SBDX) is a technology for low-dose fluoroscopy that employs inverse geometry x-ray beam scanning. To assist with rapid modeling of inverse geometry x-ray systems, we have developed a Monte Carlo (MC) simulation tool based on the MC-GPU framework. MC-GPU version 1.3 was modified to implement a 2D array of focal spot positions on a plane, with individually adjustable x-ray outputs, each producing a narrow x-ray beam directed toward a stationary photon-counting detector array. Geometric accuracy and blurring behavior in tomosynthesis reconstructions were evaluated from simulated images of a 3D arrangement of spheres. The artifact spread function from simulation agreed with experiment to within 1.6% (rRMSD). Detected x-ray scatter fraction was simulated for two SBDX detector geometries and compared to experiments. For the current SBDX prototype (10.6 cm wide by 5.3 cm tall detector), x-ray scatter fraction measured 2.8-6.4% (18.6-31.5 cm acrylic, 100 kV), versus 2.2-5.0% in MC simulation. Experimental trends in scatter versus detector size and phantom thickness were observed in simulation. For dose evaluation, an anthropomorphic phantom was imaged using regular and regional adaptive exposure (RAE) scanning. The reduction in kerma-area-product resulting from RAE scanning was 45% in radiochromic film measurements, versus 46% in simulation. The integral kerma calculated from TLD measurement points within the phantom was 57% lower when using RAE, versus 61% lower in simulation. This MC tool may be used to estimate tomographic blur, detected scatter, and dose distributions when developing inverse geometry x-ray systems.

Citation Download Citation

David A. P. Dunkerley, Michael T. Tomkowiak, Jordan M. Slagowski, Bradley P. McCabe, Tobias Funk, and Michael A. Speidel "Monte Carlo simulation of inverse geometry x-ray fluoroscopy using a modified MC-GPU framework", Proc. SPIE 9412, Medical Imaging 2015: Physics of Medical Imaging, 94120S (18 March 2015); https://doi.org/10.1117/12.2081684

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE