A novel CT-FFR method for the coronary artery based on 4D-CT image analysis and structural and fluid analysis

K. Hirohata; A. Kano; A. Goryu; J. Ooga; T. Hongo; S. Higashi; Y. Fujisawa; S. Wakai; K. Arakita; Y. Ikeda; S. Kaminaga; B. S. Ko; S. K. Seneviratne

doi:10.1117/12.2081674

18 March 2015 A novel CT-FFR method for the coronary artery based on 4D-CT image analysis and structural and fluid analysis

K. Hirohata, A. Kano, A. Goryu, J. Ooga, T. Hongo, S. Higashi, Y. Fujisawa, S. Wakai, K. Arakita, Y. Ikeda, S. Kaminaga, B. S. Ko, S. K. Seneviratne

Author Affiliations +

Proceedings Volume 9412, Medical Imaging 2015: Physics of Medical Imaging; 94122O (2015) https://doi.org/10.1117/12.2081674
Event: SPIE Medical Imaging, 2015, Orlando, Florida, United States

Abstract

Non invasive fractional flow reserve derived from CT coronary angiography (CT-FFR) has to date been typically performed using the principles of fluid analysis in which a lumped parameter coronary vascular bed model is assigned to represent the impedance of the downstream coronary vascular networks absent in the computational domain for each coronary outlet. This approach may have a number of limitations. It may not account for the impact of the myocardial contraction and relaxation during the cardiac cycle, patient-specific boundary conditions for coronary artery outlets and vessel stiffness. We have developed a novel approach based on 4D-CT image tracking (registration) and structural and fluid analysis, to address these issues. In our approach, we analyzed the deformation variation of vessels and the volume variation of vessels, primarily from 70% to 100% of cardiac phase, to better define boundary conditions and stiffness of vessels. We used a statistical estimation method based on a hierarchical Bayes model to integrate 4D-CT measurements and structural and fluid analysis data. Under these analysis conditions, we performed structural and fluid analysis to determine pressure, flow rate and CT-FFR. The consistency of this method has been verified by a comparison of 4D-CTFFR analysis results derived from five clinical 4D-CT datasets with invasive measurements of FFR. Additionally, phantom experiments of flexible tubes with/without stenosis using pulsating pumps, flow sensors and pressure sensors were performed. Our results show that the proposed 4D-CT-FFR analysis method has the potential to accurately estimate the effect of coronary artery stenosis on blood flow.

Citation Download Citation

K. Hirohata, A. Kano, A. Goryu, J. Ooga, T. Hongo, S. Higashi, Y. Fujisawa, S. Wakai, K. Arakita, Y. Ikeda, S. Kaminaga, B. S. Ko, and S. K. Seneviratne "A novel CT-FFR method for the coronary artery based on 4D-CT image analysis and structural and fluid analysis", Proc. SPIE 9412, Medical Imaging 2015: Physics of Medical Imaging, 94122O (18 March 2015); https://doi.org/10.1117/12.2081674

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE