Methodology for determining CD-SEM measurement condition of sub-20nm resist patterns for 0.33NA EUV lithography

Nobuhiro Okai; Erin Lavigne; Keiichiro Hitomi; Scott Halle; Shoji Hotta; Shunsuke Koshihara; Junichi Tanaka; Todd Bailey

doi:10.1117/12.2175841

19 March 2015 Methodology for determining CD-SEM measurement condition of sub-20nm resist patterns for 0.33NA EUV lithography

Nobuhiro Okai, Erin Lavigne, Keiichiro Hitomi, Scott Halle, Shoji Hotta, Shunsuke Koshihara, Junichi Tanaka, Todd Bailey

Author Affiliations +

Proceedings Volume 9424, Metrology, Inspection, and Process Control for Microlithography XXIX; 94240H (2015) https://doi.org/10.1117/12.2175841
Event: SPIE Advanced Lithography, 2015, San Jose, California, United States

Abstract

A novel methodology was established for determining critical dimension scanning electron microscope (CD-SEM) optimum measurement condition of sub-20 nm resist patterns for 0.33NA EUV lithography yielding both small shrinkage and high precision. To investigate dependency of resist shrinkage on pattern size and electron beam irradiation condition, shrinkage of 18, 32, and 45 nm EUV resist patterns was measured over a wide range of beam conditions. A shrinkage trend similar to that of ArF resist patterns was observed for 32 and 45 nm, but 18 nm pattern showed a different dependence on acceleration voltage. Conventional methodology developed for ArF resist pattern to predict shrinkage and precision using the Taguchi method was applied to EUV resist pattern to examine the extendibility of the method. Predicted shrinkage by Taguchi method for 32 and 45 nm patterns agreed with measurements. However, the prediction error increases considerably as the pattern size decreases from 32 to 18 nm because there is a significant interaction between acceleration voltage and irradiated electron dose in L18 array used in the Taguchi method. Thus, we proposed a new method that consists of separated prediction procedures of shrinkage and precision using both a shrinkage curve and the Taguchi method, respectively. The new method was applied to 18 nm EUV resist pattern, and the optimum measurement condition with shrinkage of 1.5 nm and precision of 0.12 nm was determined. Our new method is a versatile technique which is applicable not only to fine EUV resist pattern but also to ArF resist pattern.

Citation Download Citation

Nobuhiro Okai, Erin Lavigne, Keiichiro Hitomi, Scott Halle, Shoji Hotta, Shunsuke Koshihara, Junichi Tanaka, and Todd Bailey "Methodology for determining CD-SEM measurement condition of sub-20nm resist patterns for 0.33NA EUV lithography", Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 94240H (19 March 2015); https://doi.org/10.1117/12.2175841

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available