Thermal effect on E/M impedance spectroscopy of piezoelectric wafer active sensors

Tuncay Kamas; Erik Frankforter; Lingyu Lucy Yu; Bin Lin; Victor Giurgiutiu

doi:10.1117/12.2083958

27 March 2015 Thermal effect on E/M impedance spectroscopy of piezoelectric wafer active sensors

Tuncay Kamas, Erik Frankforter, Lingyu Lucy Yu, Bin Lin, Victor Giurgiutiu

Proceedings Volume 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015; 94350O (2015) https://doi.org/10.1117/12.2083958
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2015, San Diego, California, United States

Abstract

This paper presents theoretical predictive modeling and experimental evaluation of the structural health monitoring capability of piezoelectric wafer active sensors (PWAS) at elevated temperatures. Electromechanical impedance spectroscopy (EMIS) method is first qualified using circular PWAS resonators under traction-free boundary condition and in an ambience with increasing temperature. The theoretical study is conducted regarding temperature dependence of the electrical parameters, the capacitance C₀, d₃₁ and g₃₁; and the elastic parameters, the in-plane compliance s₁₁ and Young’s modulus c₁₁, of piezoelectric materials. The Curie transition temperature must be well above the operating temperature; otherwise, the piezoelectric material may depolarize under combined temperature and pressure conditions. The material degradation is investigated by introducing the temperature effects on the material parameters that are obtained from experimental observations as well as from related work in literature. The preliminary results from the analytical 2-D circular PWAS-EMIS simulations are presented and validated by the experimental PWAS-EMIS measurements at elevated temperatures. Temperature variation may produce pyro-electric charges, which may interfere with the piezoelectric effect. Therefore, analytical simulations are carried out to simulate the pyro-electric response from the temperature effects on a free circular PWAS-EMIS in in-plane mode. For the experimental validation, PWAS transducers are placed in a fixture that provides the traction-free boundary condition. The fixture is then located in an oven integrated with PID temperature controller. The EMIS measurement is conducted during the temperature increase and the first resonance frequency peak in admittance and impedance spectra was acquired.

Citation Download Citation

Tuncay Kamas, Erik Frankforter, Lingyu Lucy Yu, Bin Lin, and Victor Giurgiutiu "Thermal effect on E/M impedance spectroscopy of piezoelectric wafer active sensors", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 94350O (27 March 2015); https://doi.org/10.1117/12.2083958

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available