Translator Disclaimer
Paper
6 March 2015 Non-contact measurement of rotation angle with solo camera
Author Affiliations +
Proceedings Volume 9446, Ninth International Symposium on Precision Engineering Measurement and Instrumentation; 94461C (2015) https://doi.org/10.1117/12.2180752
Event: International Symposium on Precision Engineering Measurement and Instrumentation, 2014, Changsha/Zhangjiajie, China
Abstract
For the purpose to measure a rotation angle around the axis of an object, a non-contact rotation angle measurement method based on solo camera was promoted. The intrinsic parameters of camera were calibrated using chessboard on principle of plane calibration theory. The translation matrix and rotation matrix between the object coordinate and the camera coordinate were calculated according to the relationship between the corners’ position on object and their coordinates on image. Then the rotation angle between the measured object and the camera could be resolved from the rotation matrix. A precise angle dividing table (PADT) was chosen as the reference to verify the angle measurement error of this method. Test results indicated that the rotation angle measurement error of this method did not exceed ± 0.01 degree.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaochuan Gan, Anbin Sun, Xin Ye, and Liqun Ma "Non-contact measurement of rotation angle with solo camera ", Proc. SPIE 9446, Ninth International Symposium on Precision Engineering Measurement and Instrumentation, 94461C (6 March 2015); https://doi.org/10.1117/12.2180752
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Automatic calibration of a range camera using motion
Proceedings of SPIE (October 13 1994)
Binocular stereo vision system design for lunar rover
Proceedings of SPIE (November 15 2007)
Performance evaluation of a vision dimension metrology system
Proceedings of SPIE (September 01 1991)
Multisensor system self-calibration
Proceedings of SPIE (September 13 1995)

Back to Top