In this article, silicon was etched with the Bosch process and cryogenic processes for patterning high-aspect-ratio features. The two leading techniques were compared. The influences of process parameters on the aspect ratio, etching rate and sidewall roughness of silicon were studied. Strong dependence of etch rate on loading was observed. The result showed that the etching rate rely on the process parameters. The aspect ratio of 23 was obtained and is able to be further improved.
You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.