Paper
12 May 2015 Application and validation of a S/W developed for IR signal simulation by using the measured data from a moving test ship
Author Affiliations +
Abstract
We developed an IR image generation S/W to be applied for moving objects. To validate the S/W the IR signal and the surface temperature are measured from a test ship operating along a designated route on the sea, and the weather conditions and the ship positions are also measured simultaneously. Calculations of the surface temperature and the IR signal of the test ship are performed by using the measured weather data. Results obtained from the measurement and the numerical analysis show fairly good agreements and we found an applicability of the developed S/W in analyzing IR signals from moving objects
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuk-Il Han, Dong-Geon Kim, Jun-Hyuk Choi, and Tae-Kuk Kim "Application and validation of a S/W developed for IR signal simulation by using the measured data from a moving test ship", Proc. SPIE 9452, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXVI, 945215 (12 May 2015); https://doi.org/10.1117/12.2176944
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared imaging

Temperature metrology

Infrared cameras

Infrared radiation

Signal detection

Cameras

3D modeling

Back to Top