Paper
1 May 2015 High efficiency blazed fiber-chip grating coupler with interleaved trenches
C. Alonso-Ramos, D. Benedikovic, P, Cheben, S, Wang, R, Halir, J. M. Fédéli, A. Ortega-Moñux, J. H. Schmid, D. -X. Xu, M. Dado, I. Molina-Fernández
Author Affiliations +
Abstract
We demonstrate a fiber-chip surface grating coupler that interleaves standard full and shallow-etched trenches to maximize directionality in the upward direction. The coupler is implemented in a regular SOI substrate with 220 nm silicon thickness and etch depths of 220 nm (full etch) and 70 nm (shallow etch), as offered by silicon photonic foundries. The blazing effect is controlled by adjusting the separation between the two sets of trenches. This way, grating directionality exceeding 95% is achieved independently of the bottom oxide (BOX) thickness. Couplers have been fabricated at LETI using 193 nm DUV lithography on 200 mm SOI wafers with 2 μm BOX. The measured coupling efficiency is -2.1 dB with a 3 dB bandwidth of 52 nm.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Alonso-Ramos, D. Benedikovic, P, Cheben, S, Wang, R, Halir, J. M. Fédéli, A. Ortega-Moñux, J. H. Schmid, D. -X. Xu, M. Dado, and I. Molina-Fernández "High efficiency blazed fiber-chip grating coupler with interleaved trenches", Proc. SPIE 9516, Integrated Optics: Physics and Simulations II, 95160J (1 May 2015); https://doi.org/10.1117/12.2178620
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Silicon

Silicon photonics

Electroluminescent displays

Fiber couplers

Deep ultraviolet

Oxides

Back to Top