You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
4 March 2015Optical signal measurement of iso-octane autoignition behind reflected shock wave
Ignition delay time of diluted iso-octane/Air mixtures were measured in a single pulse reflected shock tube. In this work, the onset of ignition was determined by monitoring both the pressure history and the emitted light corresponding to OH* emission. The photomultiplier tube (PMT) in specially designed housing at CaF2 window were used with 310±5nm filters to measure the ultraviolet OH* emission. Experiments were performed at temperatures between 1295K and 2487K, pressures about 1 atm. and varying equivalence ratios (Φ;=0.25, 0.5, 1.0, 2.0). Long shock tube dwell time (about 15ms) was achieved by tailored contact surface operation under such conditions. To simulate real engine environment, liquid fuel aerosol was generated by the supersonic atomizer, and the size of fuel droplet in aerosol was measured. Both pressure and OH*emission histories were obtained to determine the ignition delay time and the relative strength of the ignition process. The OH* emission time history data showed that there were different behaviors of iso-octane in ignition process under varying temperatures. Several potential chemical kinetics mechanisms were used to simulated iso-octane autoignition under the same conditions. Analysis of the experiments results and simulations supported the validation of those chemical kinetics mechanisms. The experimental data was consistent with the prediction of mechanism in low temperatures and the experiment data showed that the factors of temperature and equivalent ratio have different effect on the ignition delay time
Qisheng Chen,Zhiguo Dou, andLan Li
"Optical signal measurement of iso-octane autoignition behind reflected shock wave", Proc. SPIE 9521, Selected Papers from Conferences of the Photoelectronic Technology Committee of the Chinese Society of Astronautics 2014, Part I, 95210I (4 March 2015); https://doi.org/10.1117/12.2087323
The alert did not successfully save. Please try again later.
Qisheng Chen, Zhiguo Dou, Lan Li, "Optical signal measurement of iso-octane autoignition behind reflected shock wave," Proc. SPIE 9521, Selected Papers from Conferences of the Photoelectronic Technology Committee of the Chinese Society of Astronautics 2014, Part I, 95210I (4 March 2015); https://doi.org/10.1117/12.2087323