Paper
26 August 2015 High-barrier Schottky contact on n-type 4H-SiC epitaxial layer and studies of defect levels by deep level transient spectroscopy (DLTS)
Khai V. Nguyen, Rahmi O. Pak, Cihan Oner, Mohammad A Mannan, Krishna C. Mandal
Author Affiliations +
Abstract
High barrier Schottky contact has been fabricated on 50 μm n-type 4H-SiC epitaxial layers grown on 350 μm thick substrate 8° off-cut towards the [11̅20] direction. The 4H-SiC epitaxial wafer was diced into 10 x 10 mm2 samples. The metal-semiconductor junctions were fabricated by photolithography and dc sputtering with ruthenium (Ru). The junction properties were characterized through current-voltage (I-V) and capacitance-voltage (C-V) measurements. Detectors were characterized by alpha spectroscopy measurements in terms of energy resolution and charge collection efficiency using a 0.1 μCi 241Am radiation source. It was found that detectors fabricated from high work function rare transition metal Ru demonstrated very low leakage current and significant improvement of detector performance. Defect characterization of the epitaxial layers was conducted by deep level transient spectroscopy (DLTS) to thoroughly investigate the defect levels in the active region. The presence of a new defect level induced by this rare transition metal-semiconductor interface has been identified and characterized.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Khai V. Nguyen, Rahmi O. Pak, Cihan Oner, Mohammad A Mannan, and Krishna C. Mandal "High-barrier Schottky contact on n-type 4H-SiC epitaxial layer and studies of defect levels by deep level transient spectroscopy (DLTS)", Proc. SPIE 9593, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XVII, 95930I (26 August 2015); https://doi.org/10.1117/12.2196592
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Silicon carbide

Spectroscopy

Ruthenium

Particles

Sensor performance

Temperature metrology

Back to Top