Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror

Christian Delacroix; Maud P. Langlois; Magali Loupias; Eric Thiébaut; Louisa Adjali; Jonathan Leger; Michel Tallon

doi:10.1117/12.2189094

14 September 2015 Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror

Christian Delacroix, Maud P. Langlois, Magali Loupias, Eric Thiébaut, Louisa Adjali, Jonathan Leger, Michel Tallon

Author Affiliations +

Proceedings Volume 9617, Unconventional Imaging and Wavefront Sensing 2015; 96170G (2015) https://doi.org/10.1117/12.2189094
Event: SPIE Optical Engineering + Applications, 2015, San Diego, California, United States

Abstract

Extreme adaptive optics (XAO) encounters severe difficulties to cope with the high speed (<1kHz), high accuracy and high order requirements for future extremely large telescopes. An innovative high order adaptive optics system using a self-referenced Mach-Zehnder wavefront sensor (MZWFS) allows counteracting these limitations. This sensor estimates very accurately the wavefront phase at small spatial scale by measuring intensity differences between two outputs, with a λ/4 path length difference between its two legs, but is limited in dynamic range due to phase ambiguity. During the past few years, such an XAO system has been studied by our team in the framework of 8-meter class telescopes. In this work, we report on our latest results with the XAO testbed recently installed in our lab, and dedicated to high contrast imaging with 30m-class telescopes (such as the E-ELT or the TMT). After reminding the principle of a MZWFS and describing the optical layout of our experiment, we will show the results of the assessment of the woofer-tweeter phase correctors, i.e., a Boston Micromachine continuous membrane deformable mirror (DM) and a Boulder Nonlinear Systems liquid crystal spatial light modulator (SLM). In particular, we will detail the calibration of the DM using Zygo interferometer metrology. Our method consists in the precise measurement of the membrane deformation while applying a constant deformation to 9 out of 140 actuators at the same time. By varying the poke voltage across the DM operating range, we propose a simple but efficient way of modeling the DM influence function using a Gaussian model. Finally, we show the DM flattening on the MZWFS allowing to compensate for low order aberrations. This work is carried out in synergy with the validation of fast iterative wavefront reconstruction algorithms, and the optimal treatment of phase ambiguities in order to mitigate the dynamical range limitation of such an MZWFS.

Citation Download Citation

Christian Delacroix, Maud P. Langlois, Magali Loupias, Eric Thiébaut, Louisa Adjali, Jonathan Leger, and Michel Tallon "Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror", Proc. SPIE 9617, Unconventional Imaging and Wavefront Sensing 2015, 96170G (14 September 2015); https://doi.org/10.1117/12.2189094

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available